På Windows ligger filen i HP Eloquence hemkatalog i mappen etc.

OBS! Ändra ej HP Eloquence hemkatalog i registry på WIndowsserver

LogFlags = *1        Kan vara bra då större problem loggas i logfil
BufferCache = 5      Anger hur stor buffer i minnet du vill låta databasservern
                     använda. Du ökar prestandan på servern ansevärt genom att
                     tilllåta ett stort värde. Vi kunder som kör 500 Mbyte

LogFile = /var/log/eloqqdb6.log eller C:/Temp/eloqqdb6.log beroende på OS

# eloqdb6.cfg
#
# @(#)$Revision: 1.8 1997/07/21 00:00 $
# This file defines the eloqdb6 configuration and the database environment.
# The default location depends on the operating system:
#
# Windows NT: C:/Program Files/Hewlett-Packard/HP Eloquence/etc
#
# This file is read once at eloqdb6 startup.
#
# Format:
#
# The section names are not case sensitive. String values can be enclosed
# in double quotes to protect leading or trailing spaces.
# Everything after a hash (#) character is considered a comment.

### Server configuration

[Server]

# Service       The service name (as defined in /etc/services)
#               or the port number where the server should listen
#               for requests. The default value is eloqdb.
#
# ServiceHttp   The service name (as defined in /etc/services)
#               or the port number where the server should listen
#               for HTTP requests. If this is not specified, the
#               HTTP status is disabled.
#
# UseKeepAlive  Numeric flag if the KEEP ALIVE socket option
#               should be used. Valid values are 1/0.
#               The default value is 1.
#               If this option is active, the server will check
#               after a system defined period of inactivity, if the
#               client is still alive.

#Service = eloqdb
#ServiceHttp = eloqdbhttp
#UseKeepAlive = 1

# panic         This option defines what should happen if a fatal
#               error is encountered.
#
#               The following options are valid:
#               exit    Terminate the process. This is the default.
#               dump    Terminate the process and create a core dump.
#
#               This is a problem tracking option. Unless you know what
#               you need the coredump for you probably want to stay with
#               the default.

#panic = exit

# LogFile       This defines where log messages are written to.
#               This configuration value either specifies a path/file
#               or one of the keywords below:
#
#               console  - log messages are written to the console
#               syslog   - log messages will be sent to the Windows NT
#                          Event Log
#
#               The default value is "syslog".

LogFile = /var/log/eloqqdb6.log

# LogFlags      Each log message has an associated origin and severity.
#               The log flags define, which messages will be logged.
#               The "*" origin matches all message origins, so it can
#               be used to setup a default which can be overriden
#               for a specific message origin (eg. "*1N0"):
#               Default LogFlags are "*0"
#
#               The following origin are in use:
#                  * = All origins
#                  A = Configuration subsystem
#                  X = Network transport
#                  P = Protocol handling
#                  T = Thread kernel
#                  I = IMAGE subsystem
#                  B = BTREE subsystem
#                  F = FIXREC subsystem
#                  V = Volume handling
#                  L = Transaction logging
#                  C = Page cache
#                  N = Node handling
#                  D = The server framework
#                  O = System catalog
#
#               The following severities are in use:
#                  L_ERROR  = 0   - error messages
#                  L_INFO   = 1   - information
#                  L_DEBUG  = 2   - debug
#                  L_VDEBUG = 3   - verbose debug
#
#               When using syslog, the following priorities
#               are mapped:
#                  L_ERROR  = LOG_ERR
#                  L_INFO   = LOG_NOTICE
#                  L_DEBUG  = LOG_DEBUG
#                  L_VDEBUG = LOG_DEBUG
#
#               Enabling log messages with L_DEBUG or L_VDEBUG severity
#               may result in a huge number of log messages.
#               To suppress anything but fatal messages, you can set
#               LogFlags to "*0". To enable informational log messages you
#               can set the LogFlags to "*1".

LogFlags = *1

### Data base config

[Config]

# HttpFrame     Numeric flag if the links should be omitted in HTTP status.
#               The default value is 0.

#HttpFrame = 0

# Threads       Number of threads in the data base server. A separate
#               thread is required for each client.
#               Default number of threads is 40.

#Threads = 40

# BufferCache   Size of page cache in megabytes. The page cache is
#               used to reduce the number of disc accesses. Large cache
#               size will speed up random database access, while a too
#               small cache size may cause bad server performance.
#               Default cache size is 5 MB.

#BufferCache = 5

# VnodeCache    Number of vnode cache elements. The VnodeCache is used
#               to cache Node open/close operations in the data base kernel.
#               A Node is the data base equivalent to a file.
#               Default number of VNodesCache elements is 200.

#VnodeCache = 200

# VbufElements  Number of Vbuffer elements. Vbuffers are used as scratch
#               buffers by the database kernel. About 3-5 are used per
#               concurrent active thread.
#               Default number of VBufElements is 20

#VbufElements = 20

# The server performs a checkpoint operation at fixed intervals. This
# flushes all modified buffers (including metadata) to the disk and
# resets log of committed transactions. A checkpoint is a point where
# the server knows all data are in a consistent state. Any data
# modification since the last checkpoint is recorded in the log volume.
#
# CheckPtFreq   Checkpoint frequency in seconds.
#               Default checkpoint frequency is 60 seconds.
#
# CheckPtSize   Checkpoint frequency based on accumulated log space
#               which would be freed by a checkpoint (in megabytes).
#               A zero CheckPtSize value disables size based checkpoints.
#               Default checkpoint size is 5 megabytes.
#
# The database server performs a checkpoint operation at a fixed interval
# and optionally in addition when the accumulated log space which could
# be freed by a checkpoint operation reaches a given threshold.
# The frequency of the checkpoint operations has a great influence on the
# size of the log volume since the log volume must hold all committed
# transactions since between checkpoints.

#CheckPtFreq = 60
#CheckPtSize = 5

# The syncer thread flushes modified buffer pages to the disk when they
# are likely to become reused in the near future.
#
# SyncerFreq    Syncer thread invocation frequency (in seconds)
#               Default interval is 10 seconds.
#
# SyncerMinFree Minimum number of pages which should be available in
#               a synces state so they can be reused easily.
#               Default value is 16 pages.
#
# SyncerNFlush  Maximum number of pages to flush in a single syncer run.
#               Default value is 4 pages.

#SyncerFreq = 10
#SyncerMinFree = 16
#SyncerNFlush = 4

[Volumes]

# List of data base volumes. Initially empty.
# This is usually filled in by dbvolcreate and dbvolextend utilities
Root=C:\Data\SystemQ\databas\Databas.vol
Log02=C:\Data\SystemQ\databas\Datalog.vol